| Cascade Engineering Wastewater Management Equipment |
WRS 12 and WRS 12+
The
WRS 12 and 12+ Wastewater Management equipment treat 2 gpm (up to 3000 gpd), which is adequate for many
small washing operations. The basic WRS 12 is of quality construction
without some of the features of the WRS 32. Wastewater management costs are reduced
substantially without sacrificing performance. The WRS 12 is a completely
assembled and wired with GFCI cord wastewater management solution, ready to be set in place and plugged
into a 15 amp, 115 volt outlet. The water discharge from the integral
storage tank is pressurized to feed your pressure washer, even if the
washer is remotely located. Premium components are used throughout to
insure the most trouble free operation possible. Overall size is 5 feet
1 inch long, 2 feet 5 inches deep, and 4 feet 3 inches tall. The WRS 12+
is upgraded to include many of the convenience features of the WRS 32. |
WRS 32
The
WRS 32 treats up to 8 gpm (12000 gpd), which is more than enough for
most wastewater management, treatment, and recycling operations. This
unit is equipped with many convenience
features, including automatic priming reagent pumps, integral water
storage tank, and filters status pressure gage. It is completely
assembled and wired with a GFCI cord, ready to be set in place and
plugged into a 15 amp, 115 volt outlet. The water discharge from the
integral storage tank is pressurized to feed your pressure washer, even
if the washer is remotely located. Premium components are used
throughout to insure the most trouble free operation possible. Overall
size is 7 feet 6 inches long, 3 feet 2 inches deep, and 4 feet 3 inches
tall. |
WRS 52
The wastewater recycling capabilities of the
WRS 52 are impressive, enabling it to treat up to 16 gpm (23000 gpd), which is plenty for even very
large washing operations. This unit is equipped with many convenient wastewater management
features, including automatic priming valves for the reagent pumps,
integral water storage tank, and filters status pressure gage. It comes
completely assembled and wired, ready to be set in place and plugged
into a 15 amp, 115 volt outlet. The water discharge from the integral
storage tank is pressurized to feed your pressure washers, even if they
are remotely located. Premium components insure the most troublefree
operation possible. Overall size is 8 feet long, 4 feet 2 inches deep,
and 4 feet 3 inches tall. |
|
| |
| Phone: 617-965-0007 |
Fax: 617-965-0097 |
| Toll Free: 1-800-770-BOOM |
Email: sales@boomenviro.com |
| |
|
| Factory Location: |
| 1 Coffin Avenue |
| New Bedford, MA 02746 |
| |
| BOOM Environmental Products® is
a registered trademark of Geotechnical Supply, Inc. |
|
|
|
